Tired of NMFC Re-Classification Inspections and “UP-CLASSING” Charges? Tired of Carriers Challenging Your Freight Descriptions?

Posted On 15th October 2015
FreightRun.com can now offer various solutions where you can reduce class risk and the resulting consequent increased charges.  All the solutions however depend on you submitting to the Freight Quote Calculatorthe absolutely correct gross weight (include weight of pallets, cardboard, shrink wrap EVERYTHING in that calculation, scales are a good investment!) and the absolute outside measurements of each piece you are shipping. The only ways to get around the NMFC codes is to use density only based tariffs; these tariffs determine their classes based on density ONLY; so your weights and measurements have to be accurate.

For larger shipments, 6 skids to 14 skids, Freightrun’s LTL tab of the Freight Quote Calculator will price those shipments as large partials or volume shipments, also known as quarter and half truckload pricing, and we uniquely have online volume or partial truckload pricing all automated for you.  FreightRun’s Online Volume Calculator quotes prices based on the amount of space your freight takes on the truck – so 6 standard skids take up 12 feet of space, 8 skids 16 feet, etc. It comes out to how many linear feet out of 53’ you are taking up in a truck.  Your NMFC number is irrelevant – it doesn’t need to be on the Bill of Lading.  You have no class risk.
 

For LTL or 1 to 6 skid shipments, FreightRun has made special deals with several carriers who don’t care if you leave off NMFC numbers from the Bills of Lading.  Only your freight’s density will determine its class and thus rate.


ODFL, Old Dominion Freight Lines, has designed a special account for FreightRun in which the density alone determines the class.  So be sure to enter the correct dimensions and corresponding weight on the Freight Calculator, and then be careful to choose the “density freight class” that Freight Run displays, and then there is no need to list your NMFC number in your Product Catalog on Freight Run for that particular item – you can just give a general description familiar to you and your customer perhaps the Brand name even combined with its density  – for example “Lido Design Custom Cut Safety Railings 15 lbs/cuft density”  - and ship at obviously the calculated by FreightRun density calculation which should be 15 lbs/cuft in this example.  ODFL will not challenge the rate quote with any kind of NMFC based reasoning.  They can still upcharge you if your weight is more than you indicated or measurements are also out of whack enough to put you into another class, or if your receiver requires the use of a liftgate and you did not indicate that on the bill of lading, or if your freight is over-length or something unusual, but the NFMC risk and fight is over.  ODLF is a quality carrier and avoiding time consuming tussles with carriers via shipping with ODFL under their FreightRun tariff is a great way to make yourself more efficient and to fight the old NMFC system.


Central Transport is another option FreightRun can offer to you to bypass the outdated NMFC system.  Central has an overly complicated density based formula for determining class, and they determine their class in about 50% of the cases to be a class above the normal class levels that the industry uses – still, with Central Freight’s generally lower prices, it is a worthwhile way to go, especially if the shipment is a B2B dock-to-dock shipment or at least a dock to waiting forklift at receiver shipment.
Land Air Express of New England, Ross Express, Pilot, and several other carriers are providing us with non-NMFC based tariffs – we will keep adding to the roster such quality carriers and will highlight the fact that they are density based carriers in the little “i” next to the carrier nameas shown below



The NMFC based tariff system is outdated, unfair to the shipping public, and we all hope it is on its way out.  Carriers’ risks is that shippers tender freight under these new tariffs that isn’t packed tough enough to withstand the normal rigors of LTL systems – but they could eliminate that issue with proper driver training and a requirement that the driver not accept freight that isn’t packed tough enough.  For the customers who ship, NMFC is hopelessly complicated and we need a simple shipping solution whose prices and final costs are predictable. 

FreightRun.com is working hard to provide more such non-NMFC carrier options to its clients.  The online volume large partial freight calculator already prices in thousands of spot contract carriers who are outside the NMFC system – plus we are expanding our list of pallet carriers and linear foot carriers every week for you.  Stay tuned, because FreightRun is full committed to a NMFC-free shipping world.

We’d love to hear from you, post comments below or contact us  

Get LTL or FTL Freight Quote 24/7    contact us

Share This Article:
 Back To List Get A Freight Quote 24/7